I am fairly certain that the Valjoux 72 and Valjoux 92 use different hands. I believe that the center pinions [terminology uncertain] are different sizes, so that the holes in the hands are also different sizes.

Jeff

+++++++++++++++++++++++++++++++++++++

: I am currently seeking a set of dauphine hands for a first
: execution 3 reg Valjoux.72 Autavia 2446 (see my WTB listing on
: the chronotrader)
: Can anyone tell me the correct size of these hands- length/width,
: does this set of hands have a designated model name? If you
: check the OTD photo reference,
: http://www.onthedash.com/Guide/_Chronographs/62.Autavia/a.Manual--Screw-Back_Case/Screw-Back_(1st_Execution_Case--1st_Execution_Dial)/Reference_2446_(Three_Register)/?show=25Aut7211.jpg
: you can see there are 2 types - fully lumed / center part lumed.
: They seem to be the same overall shape.

: Further question - do the hands from a Valjoux.92 or any other
: popular movement fit correctly onto the Valjoux.72 movement?

: Thanks for any help - Darren