The largest independent, non-commercial, consumer-oriented resource on the Internet for owners, collectors and enthusiasts of fine wristwatches. Online since 1998.
Informational Websites ChronoMaddox -- the legacy of Chuck Maddox OnTheDash -- vintage Heuer website Zowie -- Omega information
Discussion Forums ChronoMaddox Forum Heuer Forum Omega Forum
Counterfeit Watchers ChronoTools Forum ChronoTrader Forum
Vintage Heuer Discussion Forum
The place for discussing 1930-1985 Heuer wristwatches, chronographs and dash-mounted timepieces. Online since May 2003.
OnTheDash Home What's New! Price Guide Chronographs Dash Mounted Collection
Need your help: Autavia Compressor Case Mk 1 and 2

Hi fellow collectors

Read through the whole posting. Your help is needed.

The Autavia compressor-case (or snap-back) exists in two variants using two different bezels. The difference is in the case to bezel retaining ring diameter and of cause in the corresponding bezel inner diameter.

On this photo you see the difference on the case:

Top: Small diameter (Autavia 7863 – sn 138502)
Bottom: Large diameter (Autavia 7763 – sn 112048)

----------------------------------------------------------------------------------------------------------

On this photo you see the difference on the bezel:

Left: Small diameter (Autavia 7863 – sn 138502)
Right: Large diameter (Autavia 7763 – sn 112048)

----------------------------------------------------------------------------------------------------------

Here en face:

Left: Small diameter (Autavia 7863 – sn 138502)
Right: Large diameter (Autavia 7763 – sn 112048)

----------------------------------------------------------------------------------------------------------

........ and here are the dimensions:

----------------------------------------------------------------------------------------------------------

Your help is needed to determine:
- Is it the small or the large bezel ring that came first (Mk 1)
- When was the change from Mk1 to Mk 2. Year and sn.
- Which compressor-case Autavias used what case (I know that the 2446C used both)
- What about Skipper, Solunagraph and Mareograph (and others?)
- Are there other differences between Mk 1 and 2. Two case producers?

Please prise off the bezel and send me this info:
- What type of Autavia or derivatives
- Small or large bezel ring
- Serial number
- Picture of watch

Mail me at peter@watchsite.dk

----------------------------------------------------------------------------------------------------------

As a bonus of this project we will get a lot of serial numbers that Jeff can use in the “Coming Soon (?) - Vastly Improved Autavia Reference Table” that is .

----------------------------------------------------------------------------------------------------------

Thanks in advance
Peter, Denmark
www.heuerwatches.net

Messages In This Thread

Need your help: Autavia Compressor Case Mk 1 and 2
Re: Some answers
Thanks Paul - and more questions
Re: Thanks Paul - and more questions
Current Position
Chronocentric and zOwie site design and contents (c) Copyright 1998-2005, Derek Ziglar; Copyright 2005-2008, Jeffrey M. Stein. All rights reserved. Use of this web site constitutes acceptance of the terms of use. CONTACT | TERMS OF USE | TRANSLATE