: Was very distressed when i discovered a pusher cap had fallen off
: on my current fave watch after a nice trip on the road. Searched
: everywhere and couldnt find but finally found The cap n spring
: lodged inside my watchroll.

: In order not to lose it i have tenporarily reinstalled it and
: applied blue loctite to the screw to prevent this happening
: again (this happened ro someone here on forum a couple years
: back from search i did)

: Since i am going to be doing this loctite thing on pusher caps of
: all my watches i might as well get everything perfectly right.
: Which brings me to my question: what is the correct orientation
: for fluted pushers? Should the fluting or the flat top be facing
: up? I did a check of about 20 watches and found no statistically
: significant norm, some were even mismatched, but then i have no
: nos watches. So if anyone knows the correct orientation or
: whether there was none or this is being too anal😜.

: Thanks and pic of flat top up orientation i have temporarily
: settled on for the casualty watch
:
: