The largest independent, non-commercial, consumer-oriented resource on the Internet for owners, collectors and enthusiasts of fine wristwatches. Online since 1998.
Informational Websites ChronoMaddox -- the legacy of Chuck Maddox OnTheDash -- vintage Heuer website Zowie -- Omega information
Discussion Forums ChronoMaddox Forum Heuer Forum Omega Forum
Counterfeit Watchers ChronoTools Forum ChronoTrader Forum

zOwie Omega Discussion Forum

Opened July 1999, zOwie is the Internet's first and longest running discussion forum dedicated to Omega brand watches.

Feel free to discuss pricing and specific dealers. But 'for sale' postings, commercial solicitation and ads are not allowed. Full archive of all messages is accessible through options in the Search and Preferences features. Privacy, policies and administrivia are covered in the Terms of Use.

For the answer to the NUMBER #1 most frequently asked question here--for details or value of a specific older Omega watch you have--go to: Tell Me About My Omega. Learn more about How To Include Photos and HTML In Your Postings. To contact someone with a question not relevant to other readers of the forum, please click on their email address and contact them privately.

Re: Clasp spring replacement
In Response To: Clasp spring replacement ()

: How do I install a new clasp spring in my
: Seamaster bracelet?

This is not for the faint-of-heart. I strongly suggest bringing it to a good jeweler/watchmaker.
I am assuming you mean the spring that pushes on the two-button style traditional clasp (not hidden clasp style)

First, you need the Frei and Borel spring removal tool or similar tool.

Remove the bracelet from the watch using a forked spring bar removal tool. This will make the job easier.

Remove the two pins that hold the cover plate (the plate that has the hole that receives the mushroom of the clasp when closed) of the spring.

Remove the plate.

Notice how the old pin is oriented in the clasp so you can put in the new one properly.

Be very careful with the two buttons. Notice that they are "split" (flat-side up to accomodate the plate) with a hole to hold the new pin. Those pins are easy to lose if you "upset" the work area.

I would clean all parts now with jewelry "dip" and small brush. It is a good opportunity to do so... but it is not mandatory.

Remove the old (I assume broken) spring. Squeeze the new pin into place, properly oriented, place the tips in the ends of the buttons.

Now the hard part....While holding all this in place, put the plate back and replace the pin nearest to the expansion links.

Swing the plate closed. Hold it in place while checking to see if the push buttons move, and when pushed, create the "space" needed to accomodate the mushroom. If all seems OK, replace the other pin.

Trust me, this is EASIER to read about than DO by YOURSELF.

Good luck,

MMC

Messages In This Thread

Clasp spring replacement
Re: Clasp spring replacement
Re: Clasp spring replacement
Re: Clasp spring replacement
Current Position
Chronocentric and zOwie site design and contents (c) Copyright 1998-2005, Derek Ziglar; Copyright 2005-2008, Jeffrey M. Stein. All rights reserved. Use of this web site constitutes acceptance of the terms of use. CONTACT | TERMS OF USE | TRANSLATE