![]() |
The largest independent, non-commercial, consumer-oriented resource on the Internet for owners, collectors and enthusiasts of fine wristwatches. Online since 1998. | |||||||
|
||||||||
|
Feel free to discuss pricing and specific dealers. But 'for sale' postings, commercial solicitation and ads are not allowed. Full archive of all messages is accessible through options in the Search and Preferences features. Privacy, policies and administrivia are covered in the Terms of Use.
For the answer to the NUMBER #1 most frequently asked question here--for details or value of a specific older Omega watch you have--go to: Tell Me About My Omega. | Learn more about How To Include Photos and HTML In Your Postings. | To contact someone with a question not relevant to other readers of the forum, please click on their email address and contact them privately. |
I'm assuming you used a proper crystal removing tool to remove the crystal because you'll need it to replace the crystal as even pressure is required around the crystal rim. So to remove the crown, you normally use a crown lever that allows crown and the detachable part of the stem to come off together. Then you use a pin vise to remove the crown if that was what you intended to do. The detachable part of the crown stem is split so as to be easily returned to the movement part of the stem when re-assembling. So after removing crown and detachable part of the stem, you should not see anything sticking out of the crown pipe.
To remove the movement you need to carefully rotate movement and dial together anti-clockwise until 12 oclock reaches where 11 o'clock normally sits. Again, if youre not careful you'll damage the dial. After rotating the movement and dial to position, grab a soft cloth in the palm of your hand and turn the case upside down and movement and dial should should fall into your palm.
If there is stem still poking out of the crown pipe you will need to wind the crown back on if you can. Then use some tool that does not put pressure only on one part of the crown but allows more even pressure to be applied. Gently but firmly lever the crown and detachable stem off. If that doesnt work, get some help from a professional.
I admire your courage :)
Cheers
desmond
: Thanks for your reply. Excuse my ignorance but is the stem the long
: metal pin that sticks out of the movement?
: So it seems then that I have snapped the stem as part of it is in
: the crown still - is that correct?
: I did remove the crystal no problem but I couldn't see any way to
: remove the movement without removing the crown first and the
: only way I could see to do that was to pull it. Oops!!
Chronocentric and zOwie site design and contents (c) Copyright 1998-2005, Derek Ziglar; Copyright 2005-2008, Jeffrey M. Stein. All rights reserved. Use of this web site constitutes acceptance of the terms of use. | CONTACT | TERMS OF USE | TRANSLATE |