The largest independent, non-commercial, consumer-oriented resource on the Internet for owners, collectors and enthusiasts of fine wristwatches. Online since 1998.
Informational Websites ChronoMaddox -- the legacy of Chuck Maddox OnTheDash -- vintage Heuer website Zowie -- Omega information
Discussion Forums ChronoMaddox Forum Heuer Forum Omega Forum
Counterfeit Watchers ChronoTools Forum ChronoTrader Forum

zOwie Omega Discussion Forum

Opened July 1999, zOwie is the Internet's first and longest running discussion forum dedicated to Omega brand watches.

Feel free to discuss pricing and specific dealers. But 'for sale' postings, commercial solicitation and ads are not allowed. Full archive of all messages is accessible through options in the Search and Preferences features. Privacy, policies and administrivia are covered in the Terms of Use.

For the answer to the NUMBER #1 most frequently asked question here--for details or value of a specific older Omega watch you have--go to: Tell Me About My Omega. Learn more about How To Include Photos and HTML In Your Postings. To contact someone with a question not relevant to other readers of the forum, please click on their email address and contact them privately.

thanks Keith
In Response To: Here ya go ()

: I managed to find your same posting on timezone. I planned to answer my own question with a reference to your posting which gives a very clear explanation, will order the tool asap.

Thanks again.
:
: http://www.tztoolshop.com/FB_Catalog_Link_Pin_Removers.html

:
:
:

: Mine came with a long drift pin inside of the
: tool accessible through the bottom hatch.

: It's easier if you take one end of the bracelet
: off the watch first. Push the pins out in
: the direction of the arrows on the bracelet
: by lining up the drift pin and turning the
: screw.

:
:
:
:

: In the center section, there is a locking
: sleeve. Notice it is has a notch close to
: each end. This corresponds with a crimp in
: ONE end of the pin. When you insert the pin
: back into the bracelet, aligning the holes,
: make sure the crimp end of the pin goes in
: last. This means the crimp doesn't have to
: push through two of the notches in the
: sleeve.

:
:
:

: Make sure you push the pin back in in the
: opposite direction of the arrows. Push the
: pin in with a hard surface, making sure you
: align all the holes. I usually use the tool
: to recess the pin going back in. This is a
: little tricky, because the drift pin wants
: to slide off the end of the bracelet pin. Be
: carefull here if you don't want to make any
: marks on you links.

: It's pretty easy with this bracelet, but much
: harder with the older style "Bond"
: bracelet, which has two shorter locking
: sleeves and more holes to align and push
: through.

: I hope this helps you.

: Best WIS hes,

: Keith Downing

Current Position
Chronocentric and zOwie site design and contents (c) Copyright 1998-2005, Derek Ziglar; Copyright 2005-2008, Jeffrey M. Stein. All rights reserved. Use of this web site constitutes acceptance of the terms of use. CONTACT | TERMS OF USE | TRANSLATE