The largest independent, non-commercial, consumer-oriented resource on the Internet for owners, collectors and enthusiasts of fine wristwatches. Online since 1998.
Informational Websites ChronoMaddox -- the legacy of Chuck Maddox OnTheDash -- vintage Heuer website Zowie -- Omega information
Discussion Forums ChronoMaddox Forum Heuer Forum Omega Forum
Counterfeit Watchers ChronoTools Forum ChronoTrader Forum

A marketplace for chronographs, dive watches and other tool-type wristwatches and timepieces

This forum is for BUYING, SELLING and TRADING only--not for discussing watches. Please limit postings to specific ads for buying, selling or trading watches, parts or accessories that that match at least one of the following categories:

Please see our ChronoTrader Policies and Terms of Use. Learn more about How To Include Photos In Your Postings.

Rules: Postings must be an ad announcing an intent to sell, buy or trade. Full item description and photo(s) must be posted within the message here, not as links to other websites. Links to online auctions and other sites: Links to online auctions, dealer sites or other listings of items are permitted, but you should be careful to ensure that such listings will comply with our other ChronoTrader Policies. In addition, we request that sellers linking to online auctions or listings offer some benefit or accomodation to ChronoTrader readers (for example, some discount or an undertaking to end an auction early, to keep a watch "in the family"). Photos must be of the actual item for sale in its present condition. No counterfeit or replica products. No post for the same item may be repeated within 7 days, except to lower the asking price. Commercial dealers are limited to three unique posts per day. [More...]

FS: Flat-link bands to Ranchero Railmaster Speedmaster SM300 120

Can’t afford thousands for an old vintage Omega flat-link bracelet? Here you can be out the door with a minty New Old Stock 1960s real vintage flat-link and 20mm ends for as little as $415 and be wearing it this week. We ship internationally every day. With Express, international buyers can have this item in a week anywhere in the world right now. U.S. buyers get their flat-link within the next few days.

Even the Omega reproduction of its own flat-link is twice the price of our offering, and why not go with our real vintage flat-link instead of a repro? The look of the new bracelets just isn't the same. These are nearly identical to the originals, and we offer a variety of ends to help you mount this flat-link on nearly any watch.

Flat-link bracelets are all the rage with Omega collectors today, and you’ll see examples on Rancheros, Constellations, Seamasters, Railmasters, Seamaster 120s and 600s and many others. Some great vintage Omega ads with 1950s, '60s and '70s Omegas are popping up showing these watches first advertised on flat-link bracelets. These bracelets are most popular with any era Omega Speedmaster, from the early 19mm lug models to the most common 20mm Speedies, all the way up to the FOIS new heritage piece with the 19mm lugs. Secondly, they are most popular with Seamaster 300 models. We have all popular end sizes in stock: 18mm, 19mm and 20mm, with either matte finish or polished outers to match the bracelet.

The gallery here now shows these flat-link bands on all of the most coveted 19mm and 20mm Omega Speedmaster watches. Our offer is an incredible bargain compared to what you would pay for an Omega original, and this vintage bracelet is New Old Stock. Expect to pay $1,000 for an Omega vintage flat-link bracelet then an additional $1,500 for a pair of #6 Omega type 19mm end pieces or $750+ for a pair of Omega 20mm #516 ends, if you can even find these rare parts.

We’ve sold these real NOS vintage flat-links since 2018 helping 150+ customers fit these 1960s bracelets on many different watches around the world. These replace such popular Omega bracelet references such as 1035, 1039, 1506, 7077 and 7912.

The next photos show the most popular configuration: 20mm complete with band and ends for $415 matte finish ends or $465 polished outer ends as shown below:


Look at the many customer's pictures here to see how Omega collectors have deployed these on many models of Omega Speedmaster, Seamaster 300, the Ultraman Speedmaster series and even the Helson SM300 remake. These are especially popular with the 60th Anniversary models. If you don't see your watch pictured here on these flat-link bracelets, message us; we may have a customer's photo on your watch.

If you have an Ed White Speedmaster or modern FOIS Speedmaster with the 19mm lugs or vintage Seamaster 300, here’s how your watch can look with the band and 19mm ends included starting at $525 (matte version shown in photos) or $565 with polished edges end pieces. Here's the Ed White (matte finish ends):



Here's the FOIS (matte finish ends):


The condition of used Omega flat-links is often rough and stretched with links missing or damaged, too short or too long. This is a cost-effective, very similar vintage Mint Condition NOS flat-link band that you can also order in Short or Long versions.

Flat-link bands are popular for a good reason: The links conform to your wrist, flexing just a bit and making these extremely comfortable to wear, while appearing sleek and stylish. The clean, simple look of one of these on a Speedmaster or SM300 just cannot be matched with modern bands. Even modern flat-link bands are chunky by comparison, nothing is the same as the 1960s classic flat-link.

The bracelet offered here in the center is flanked by an Omega 1039 band on the left and an Omega 7912 band on the right.

You can see from the photos that the generic band is nearly identical to both the Omega 7912 and 1039 bracelets shown alongside it. The taper of the unsigned band is very similar, as is the top finish, with a satin center row and polished accents on the edges like the original finish of the Omega flat-link bracelets. The clasp is 17.3mm wide and the links gradually flare out to 18.3mm wide at the end. The links are 2.8mm thick. Build quality is a notch up from the Omega bands. The brick links of the generic are a bit heavier than the Omega band links. Band weighs 34 grams (vs 31 grams for the Omega bands). One feature that we actually like better about this generic band is that the center end connectors have a spring bar tube built in to accept up to a 2mm thick spring bar to securely attach the bracelet to your watch. Original Omega flat-link bands don’t have that; the center connection pieces are just open links the spring bar slides through.

We're offering a New Old Stock 1960s/70s bracelet with 10mm center connection links that will also work with many original Omega end pieces of the period that fit 19mm SM300s and 19mm or 20mm lug Speedmasters, if you want to give your valuable Omega flat-link a rest. Thebracelet for sale here is shown in the following pictures attached to the 1962 Seamaster 300 (ref. 14755) with the original Omega #6 ends in 19mm and connected to a 1968 Speedmaster (ref. 145022-68ST) with original Omega #516 ends.

Shown here connected to Omega #516 end 20mm on 1968 Omega Speedmaster Professional with an original Omega 1039 band beside it.

Shown here connected to Omega #516 end 20mm on 1999 Omega Speedmaster Broadarrow:


Shown here connected to Omega #6 end 19mm on 1962 Omega Seamaster 300 ref. 14755 with the original Omega 7912 band beside it.

If you own a straight lugs Speedmaster or Railmaster, a FOIS Speedmaster or an early SM300, the 19mm Omega #6 style aftermarket ends we sell are an excellent fit for just $200 in all matte finish or $240 with the polished outer rows shown at the bottom of this ad. The 20mm #516 type ends we sell fit all twisted lugs Omega Speedmaster models. The 20mm ends come in all matte finish for $90 or with polished outer rows for $140. Have a 1950s Seamaster or Constellation shown in its original ad on a flat link? We have the 18mm ends you will need for $75 in matte finish or $125 with polished outer rows.

This flat-link bracelet is a good length that will fit many wrist sizes. Fully extended the band measures 6 inches (15.2cm) and it sizes down to 5 1/8 inches (13cm) with 7 incremental length adjustments in the clasp. To make the band shorter, each side of the standard length band has a removable link with a easy, pop-out spring bar pin and then you can unfold additional links from the back and remove them as well. The back of the clasp is signed “Kreisler Stelux Stainless Steel Made in Hong Kong.” These came stored in protective wrappers, so the condition is mint NOS.




BRACELET PRICE: $325 (6 inches/15.2cm)

Short version 5 5/8 inches (14.3cm) $295
Long version 7 inches (17.7cm) $395

(Inquire about an Extra Short or Extra Long version)

END SETS (available only to buyers of our flat-link bands)
18mm ends $75 (matte finish)
18mm ends $125 (polished outers)
19mm ends $200 (matte finish)
19mm ends $240 (polished outers)
20mm ends $90 (matte finish)
20mm ends $140 (polished outers)

BUY 2 BRACELETS AT ONCE AND SAVE: You get the second set of ends or international Express shipping free. Inquire for details.

Here are the 19mm matte finish ends:

Here are the 20mm matte finish ends:

Here are the 20mm “polished outers” ends:




U.S. buyers pay $7.99 shipping and international shipping anywhere is $85 via Express to arrive in 3-4 days to most countries.

PAYPAL or QUESTIONS to billmahoney@aol.com

Thanks for looking, Bill (Squinky)

Squinky.com

Current Position
Chronocentric and zOwie site design and contents (c) Copyright 1998-2005, Derek Ziglar; Copyright 2005-2008, Jeffrey M. Stein. All rights reserved. Use of this web site constitutes acceptance of the terms of use. CONTACT | TERMS OF USE | TRANSLATE